Katana – Seven Interlocking Pieces 3D Printer Model
The file 'Katana – Seven Interlocking Pieces 3D Printer Model' is (stl) file type, size is 2.5MB.
The file 'Katana – Seven Interlocking Pieces 3D Printer Model' is (stl) file type, size is 2.5MB.
This was created to be a Halloween prop that could be broken down and packed into a backpack.
Buy two 3/16" wooden dowels for $0.34 each at Home Depot, or I got mine for 27 cents at Wal Mart.
Cut 12 dowels to 65mm and insert them into each blade section. Add finishing touches by wrapping the handle with leather, painting the blade, etc. Check out phatzero's version for a four-piece sheath that can also be printed for this model.
When swinging the sword around with the blade's edge leading, it exhibits good strength. When swinging it sideways, it is kind of wobbly.
| Katana_blade_1.stl | 2.4MB | |
| Katana_blade_2.stl | 545.8KB | |
| Katana_blade_3.stl | 259.1KB | |
| Katana_blade_4.stl | 225.5KB | |
| Katana_blade_5.stl | 207.2KB | |
| Katana_handle_1.stl | 526.4KB | |
| Katana_handle_2.stl | 1.8MB |
