Katana ERacer 3D Printer Model
The file 'Katana ERacer 3D Printer Model' is (stl) file type, size is 4.7MB.
The file 'Katana ERacer 3D Printer Model' is (stl) file type, size is 4.7MB.
This is my new version of the Katana. it's a 2WD race car. I Hope you enjoy it.
Additional parts needed:
1) Diff. Main Gear code. 03004 - 1 Set
2) Diff. Complete code. 02024 - 1 Set
3) Wheel Axle code. 02033 - 1 Set
4) Universal Joint Code. 02016 - 1 Set
5) DogBones code. 02003 - 1 Set
6) Ball Bearing 10x5x4 code. 02139 - 1 Set
7) Ball Bearing 15x10x4 code. 02138 - 1 Set
8) Plenty Of 3mm Screws and Bolts!!
These are all products of Himoto and are easily found on EBay, for me they are the best products quality/price around but you can use whichever components you prefer because they are all standard 1:10 sizes.
https://www.facebook.com/Creations-by-Vincent-Marcello-1796479547231108/
| BodyPart1.stl | 26.8KB | |
| BodyPart2.stl | 158.6KB | |
| BodyPart3.stl | 626.2KB | |
| BodyPart4.stl | 321.0KB | |
| BodyPart5.stl | 167.3KB | |
| Bumper.stl | 26.1KB | |
| CentralBlock.stl | 367.3KB | |
| DiffA.stl | 174.8KB | |
| DiffB.stl | 57.6KB | |
| FrontBaseLeft.stl | 464.0KB | |
| FrontBaseRight.stl | 82.1KB | |
| FrontCover.stl | 381.4KB | |
| FrontLeftCHub.stl | 298.2KB | |
| FrontLeftWishbone.stl | 231.1KB | |
| FrontPlate.stl | 649.1KB | |
| FrontRightCHub.stl | 298.2KB | |
| FrontRightWishbone.stl | 233.0KB | |
| FrontShockAbsorber1.stl | 259.9KB | |
| FrontShockAbsorber2.stl | 206.8KB | |
| FrontShockAbsorber3.stl | 39.7KB | |
| FrontShockAbsorber4.stl | 155.9KB | |
| FrontShockTower.stl | 79.9KB | |
| FrontSpacer.stl | 169.9KB | |
| FrontSupport.stl | 434.4KB | |
| FrontTire.stl | 3.2MB | |
| FrontTurnBuckle.stl | 118.9KB | |
| FrontWheel.stl | 271.1KB | |
| FrontWheelAxle.stl | 252.6KB | |
| LeftSteeringBlock.stl | 644.1KB | |
| MainGear.stl | 788.5KB | |
| MotorCover.stl | 191.1KB | |
| MotorMount.stl | 54.4KB | |
| RadioCover.stl | 129.7KB | |
| RearCover.stl | 232.3KB | |
| RearLeftCHub.stl | 62.0KB | |
| RearLeftWishBone.stl | 212.1KB | |
| RearPlate.stl | 597.9KB | |
| RearRightCHub.stl | 62.0KB | |
| RearRightWishBone.stl | 218.0KB | |
| RearShockAbsorber1.stl | 259.9KB | |
| RearShockAbsorber2.stl | 206.8KB | |
| RearShockAbsorber3.stl | 39.3KB | |
| RearShockAbsorber4.stl | 155.9KB | |
| RearShockTower.stl | 80.2KB | |
| RearSpacerA.stl | 169.1KB | |
| RearSupport.stl | 509.5KB | |
| RearTire.stl | 3.2MB | |
| RearTurnBuckle.stl | 117.4KB | |
| RearWheel.stl | 256.6KB | |
| RearWheelHex.stl | 147.0KB | |
| RightSteeringBlock.stl | 644.1KB | |
| ServoMount.stl | 231.4KB | |
| SpoilerCentral.stl | 29.3KB | |
| SpoilerLeft.stl | 14.1KB | |
| SpoilerRight.stl | 14.2KB | |
| SteeringCap.stl | 114.6KB | |
| SteeringPart1.stl | 203.3KB | |
| SteeringPart2.stl | 236.3KB | |
| SteeringPart3.stl | 147.1KB | |
| SteeringPart4.stl | 279.5KB | |
| SteeringPin.stl | 196.9KB |
