2023/7/8
すいません。この子はかなり昔に作製したものです。
必要な部品が手に入らないかもしれません。
また、印刷した部品を自身で加工できる方向けです。
上記の理由により私からのサポートが難しいことを
先にご了承ください。よろしくお願いします。
Excuse me. This Doll was made a long time ago.
The parts you need may not be available.
Also, it is for those who can process printed parts by themselves.
Please understand that it is difficult for me to support you due to the above reasons.
Thank you.
History
2020/4/27:Update STL
[3_kyoubu_chest_rev2]add
胸の描写を細かくしました。
The chest has been detailed.
2020/3/29:Update2 STL
[8_migite_right hand_rev2] add
[9_hidarite_left hand_rev2] add
指の断面を四角形から円形へ修正
Fixed finger cross section from square to circular
2020/3/29:Update1 STL
[11_migidaitai_right thigh_rev2] add
[12_hidaridaitai_left thigh_rev2] add
[13_migikatai_right lower thigh_rev2] add
[14_hidarikatai_left lower thigh_rev2] add
膝関節の形状を変更し、ポーズをとりやすくしました。
The shape of the knee joint has been changed to make it easier to pose.
2019/10/18:Update STL
[10_hukubu_abdomen_rev2] add
股関節の稼働範囲増加
Increased hip joint operating range
2019/10/18:Added description of print settings. Readme_Rev2→2.3
2019/10/15:Created assembly instructions in Readme_Rev2
2019/7/16:Create revision 1
この作品は身長約52㎝の磁石関節ドールです。
一般的な球体関節人形とは違う事に注意してください
PLAフィラメントやTPUフィラメントによる3Dプリントの他、組立にはネオジム磁石、トイスケルトン、接着剤が必要です。
また、完成後はドールアイや顔の化粧、衣装やヴィッグが必要です。
This work is a magnet joint doll about 52 cm tall.
Please note that it is different from the general ball joint doll
In addition to 3D printing with PLA and TPU filaments, assembly requires neodymium magnets, toy skeletons and adhesives.
In addition, you will need doll eyes, facial makeup, costumes and wigs after completion.
| 10_hukubu_abdomen_rev1.stl | 8.2MB | |
| 10_hukubu_abdomen_rev2.stl | 16.0MB | |
| 11_migidaitai_right_thigh_rev1.stl | 8.6MB | |
| 11_migidaitai_right_thigh_rev2.stl | 3.8MB | |
| 12_hidaridaitai_left_thigh_rev1.stl | 1.6MB | |
| 12_hidaridaitai_left_thigh_rev2.stl | 3.8MB | |
| 13_migikatai_right_lower_thigh_rev1.stl | 1.2MB | |
| 13_migikatai_right_lower_thigh_rev2.stl | 7.2MB | |
| 14_hidarikatai_left_lower_thigh_rev1.stl | 1.2MB | |
| 14_hidarikatai_left_lower_thigh_rev2.stl | 7.2MB | |
| 15_migiasi_right_foot_rev1.stl | 17.5MB | |
| 16_hidariasi_left_foot_rev1.stl | 17.5MB | |
| 17_A_130_110_rev1.stl | 59.3KB | |
| 18_B_177_168_rev1.stl | 59.3KB | |
| 1_atama_head_rev1.stl | 5.3MB | |
| 2_kao_face_rev1.stl | 25.3MB | |
| 3_kyoubu_chest_rev1.stl | 12.6MB | |
| 3_kyoubu_chest_rev2.stl | 12.6MB | |
| 4_migizyowan_right_upper_arm_rev1.stl | 1.1MB | |
| 5_hidarizyowan_left_upper_arm_rev1.stl | 1.1MB | |
| 6_migizenwan_right_forearm_rev1.stl | 906.1KB | |
| 7_hidarizenwan_left_forearm_rev1.stl | 906.1KB | |
| 8_migite_right_hand_rev1.stl | 8.4MB | |
| 8_migite_right_hand_rev2.stl | 12.6MB | |
| 9_hidarite_left_hand_rev1.stl | 8.4MB | |
| 9_hidarite_left_hand_rev2.stl | 12.6MB | |
| Readme_Rev2.3.pdf | 1.8MB |
