Wallholder from KAD ( https://www.myminifactory.com/object/3d-print-kad-universal-holders-91669 ) for my Jula Worklight 008228
The wallmount is "base-part-big-outdoor.stl" includes direct from KAD for simplicity.
The BracketHolder is based from "holder-big.step" in original KAD package (not included).
The BigBracket is the holder for the light itself.
Original screws can be used, but i would recommend a lock-washer to prevent the light from dipping down. Or a smidge of thread-tape will hold the knob in place.
The hole in the light holder is for M4.
The hole in the BracketHolder is for M6 (around 70mm long will allow for washer and locknut).
The gap on the holder is 18mm, so the holder should be able to have other uses if needed.
EDIT1: I had the wrong baseplate file by accident. Correct file is "base-part-big-outdoor.stl"
Update 2020-03-29; Added a holder for the chargecable.
base-part-big-outdoor.stl | 345.7KB | |
BracketHolder_big_v1.f3d | 217.7KB | |
CableHolder.stl | 480.9KB | |
Holder_Charge_Cable_v1.f3d | 346.7KB | |
KAD_BigBracket_Jula_Light_008228.stl | 120.0KB | |
KAD_BigBracket_v3.f3d | 121.1KB | |
KAD_BracketHolder_Big_Jula_Light_008228.stl | 121.8KB | |
trash-bag-holder-big-outdoor.stl | 59.5KB |