K8200 Anti-vibration Foot 3D Printer Model
The file 'K8200 Anti-vibration Foot 3D Printer Model' is (stl) file type, size is 666.7KB.
The file 'K8200 Anti-vibration Foot 3D Printer Model' is (stl) file type, size is 666.7KB.
Inspired by this part:
http://www.thingiverse.com/thing:198015
till now the thing was not used but it printed well (for a relativ fast Print)
Damping-foot for a K8200-3D-Printer or other 3D-Printer with 40mm foot-diamter. Also for other Applications where a decoupling of vibrations are required. (for other applications a adapter-thing could be conceivable)
The specific spring-damping-characteristik is not given, but you can change it by inject the "stiffness-creator" part. Its also possible to take your own stiffness-creator, which shold have a wide of 9.5mm and high about 10mm or you inject a small piece of viscoelastic material.
The Functionality of the "stiffnesscreator" part is actual a coupling of the upper 4-way-spring-mechanism with the lower-leaf-spring, which should give more spring-stiffness if needed.
| daempfer_k8200_Light.stl | 138.6KB | |
| daempfer_k8200_V1.0.stl | 1.5MB | |
| stiffness-creator3.stl | 23.9KB |
