K40 Laser Z-Bed With Manual Adjust 3D Printer Model
The file 'K40 Laser Z-Bed With Manual Adjust 3D Printer Model' is (stl) file type, size is 8.3KB.
The file 'K40 Laser Z-Bed With Manual Adjust 3D Printer Model' is (stl) file type, size is 8.3KB.
This is probably the simplest Z-bed solution of this type out there. There is only one printed part (Qty 8), and the rest of the hardware can be found at any home improvement store.
Bill of Materials
K40 Z-Bed Corner - 3D Printed - Qty 8
4" 5/16-18 Bolt - Qty 4
5/16-18 Hex Nut - Qty 12
Aluminum C-Channel - 3/8" x 1/2" x 48" 1/16 Thick - Qty 2
The C-Channel should be cut to the following dimensions for a standard K40:
315 mm Qty 4
200 mm Qty 4
That's it! You will need to put your own base on top. It can be honeycomb, or non-reflective metal.
| K40_Z-bed_Corner.stl | 42.7KB |
