K40 Laser – Arduino Based Adjustable “Hub Table” Panel With OLED Display And LED Powerpanel 3D Printer Model Free Download

3D Printer Models

K40 Laser – Arduino Based Adjustable “Hub Table” Panel With OLED Display And LED Powerpanel 3D Printer Model

Author: @Printcontrol

License: CC BY-NC-SA

File formats: stl,dxf,ino,pdf

Download type: zip

Size:1.9MB

The file 'K40 Laser – Arduino Based Adjustable “Hub Table” Panel With OLED Display And LED Powerpanel 3D Printer Model' is (stl,dxf,ino,pdf) file type, size is 1.9MB.

Description Files (6)

Summary

I created a new Panel for my K40 Laser to include

the LED powerpanel
all buttons and a 0.96" OLED display for my Arduino driven HubTable
switch for Air assist..

this is a add on to
https://www.thingiverse.com/thing:2731038
and a work in progress project

https://youtu.be/TlZPUIvakcg

Added the arduino scetch

used libs:
the AH_Pololu
Adafruit_GFX
Adafruit_ssd1306

there is one button for UP, one for DOWN and one to set to 0.

The Poti is to adjust the "Speed" down to 1 Step for a single push.
I used M8x1,25 Spindles and 720 Steps per 360° ... for pretty fine adjustments :)
The display showes the exact position relative to the last reset to 0

The max. possible motor speed is limitted by the performance of the graphics output...
but its OK .
May be an enhancement for next leasure times...
pressing the zero button together with up or down will prevent the display refresh for long distance runs

Cirquit is designed for Arduino NANO

Cover.stl	2.1MB
Electronic_Housing.stl	829.1KB
HubTable_Platine.dxf	430.1KB
HubTable_SPI_Display.ino	10.2KB
PanelLayout.dxf	629.1KB
Platine_PINs.pdf	830.6KB

K40 Laser – Arduino Based Adjustable “Hub Table” Panel With OLED Display And LED Powerpanel 3D Printer Model

Summary

Tags

You might also like