I was getting ready to make the terrific K2 Battle tank, but it needed some mods to remove the top for easier RC work. I have made a separate top and bottom of the hull and reinforced some areas. I also resized the wheels/sprockets a touch to make room for the treads. I will be enlarging this by 25-35% to make it a little larger to accommodate the RC guts and size match my Tamiya Leopard RC tank. As far as treads, I have added those I plan to use, but they may need to be test printed for proper scaling as I modified them as much as I could and they look to fit; however, any suitable treads can be used if they fit the sprocket wheels.
Edit 3/4/24: I uploaded a new lower body (B) to accommodate the adjustment needed for the forward sprocket wheels along with an adjustment bar to add machine screws to push the axle forward to tighten the treads.
| K2_Black_Panther_Barrel_06.stl | 243.1KB | |
| K2_Black_Panther_Hull_-_BottomB.stl | 7.7MB | |
| K2_Black_Panther_Hull_-_Top.stl | 21.9MB | |
| K2_Black_Panther_Turret_20.stl | 4.0MB | |
| tracks_v1.stl | 111.2KB | |
| Wheels_v2.stl | 2.6MB |
