K1/K1 MAX TOP GLASS RISER .5in TALL 3D Printer Model
The file 'K1/K1 MAX TOP GLASS RISER .5in TALL 3D Printer Model' is (STL) file type, size is 94.8KB.
The file 'K1/K1 MAX TOP GLASS RISER .5in TALL 3D Printer Model' is (STL) file type, size is 94.8KB.
UPDATE: I've added a new clip variant that raises the glass up about .25" for ventilation and can be easily hot swapped for the original clips in seconds. I would recommend only using them on one side so the glass can still rest against the corner stops and not slide off. And admittedly you could just rotate the glass 15-25 degrees and have it sit on the riser with no additional parts, but who doesn't like options, am I right? Yep... totally wasn't an excuse to use up extra filament..
Oh boy, another K1 Raiser.
A short, .5in tall, riser that is just enough to get the bowden tube to stop rubbing on the glass.
Requires 4 of the riser pieces and 16 of the clips. Short side of the clip goes on top.
| K1_MAX_TOP_GLASS_RISER_V1.STL | 263.0KB | |
| TOP_GLASS_RISER_CLIP_V1.STL | 24.1KB | |
| TOP_GLASS_VENT_RISER_CLIP_V1.STL | 30.4KB |
