K1 MAX CABLE CHAIN GUIDE 3D Printer Model
The file 'K1 MAX CABLE CHAIN GUIDE 3D Printer Model' is (STL) file type, size is 5.2KB.
The file 'K1 MAX CABLE CHAIN GUIDE 3D Printer Model' is (STL) file type, size is 5.2KB.
Apologies for the light exposure in the images. it was hard to see without it.
This is not a remix, this was made from scratch using measurements directly from my printer with visual inspiration from other designs.
Saw something similar on here and tried it out to limited success, so I made this one that is slight thicker and fits the existing guide in the printer slightly better. Please note, measurements were taken from a K1 AI Max so, fitment may be different depending on your printer.
NOTE: It may be advantageous to file the end of the guide near the bowden tube into a radius to prevent wear or excess drag on the tube. I would add this to the model, but that may effect the bed adhesion when printed on the angled edge. Messing with the position of the bowden tube clips may improve cable sag as well.
| K1_MAX_CABLE_CHAIN_GUIDE.STL | 18.2KB |
