K1 / K1 Max Acrobatic Bowden PTFE Tube Guide 3D Printer Model
The file 'K1 / K1 Max Acrobatic Bowden PTFE Tube Guide 3D Printer Model' is (stl) file type, size is 189.2KB.
The file 'K1 / K1 Max Acrobatic Bowden PTFE Tube Guide 3D Printer Model' is (stl) file type, size is 189.2KB.
Creality K1 / K1 Max Acrobatic Bowden Tube Guide
This is an acrobatic bowden tube guide for Creality K1 and K1 Max
I designed this guider during my efforts to move the filament spool to the left side of the k1 max.
With its acrobatic design, you can use it even if the filament spool is in its original place at the back.
Support should be used for the main body bolt gap.
There is no need for auxiliary parts such as Pneumatic Connector in my design. The holes in the diverter piece are narrow enough to hold the pipe adequately and won't budge without applying some force.
You need some m3 bolts and nuts:
2x m3x6 bolt
2x m3 nut
2x m3x18 or m3x20 bolt ( You can use hex head bolts or bolt-nut combination )
Different bolt and nut combinations can be applied in my design. I generally use m3 hex head and Phillips Pan Head type elements to make my designs for smaller.
I hope someones likes it.
If you want to support
https://www.etsy.com/listing/1617734029/creality-k1-max-acrobatic-bowden-tube
https://www.crealitycloud.com/model-detail/655e1c1c867d4f47bad4760d
| K1_acrobatic_bowden_tube_guide.stl | 397.4KB | |
| K1_Max_acrobatic_bowden_tube_guide.stl | 395.5KB | |
| m3_13_13_1.stl | 112.3KB |
