K-State Box 3D Printer Model
The file 'K-State Box 3D Printer Model' is (stl) file type, size is 1.2MB.
The file 'K-State Box 3D Printer Model' is (stl) file type, size is 1.2MB.
GO CATS!!!!!!
This is simply a personalized remix of the Small Parts Storage Box (increased to 130% the original size).
How I do it: Print the hinges/latch file @ 75% infill, then print the top and bottom @ 15% infill with a high amount of walls (to ensure where the latch/hinges attach is sturdy enough)
REQUIRED to Complete Assembly = M4 x 30mm bolts, M4 lock nuts
Quantity = 6 bolts, 6 nuts
(M4 x 35mm bolts would probably work better, but I haven't tried to find them yet because the 30mm are working fine)
I've had issues with where the hinges/latch attach, so I print with a high number of walls (5 using profile:magic.28) and 15% infill.
Enjoy! This is one of several remixes of this box I have created. Check the others out if you're interested!!! :)
| Bottom_Regular.stl | 1.3MB | |
| Box_Hinges__Latch_complete_set.stl | 382.0KB | |
| K-State_Box_TOP.stl | 1.1MB |
