K-Kart(3D Printed C-Tug) 3D Printer Model
The file 'K-Kart(3D Printed C-Tug) 3D Printer Model' is (stl) file type, size is 3.7MB.
The file 'K-Kart(3D Printed C-Tug) 3D Printer Model' is (stl) file type, size is 3.7MB.
This is my version of a remake of the C-Tug, but at a fraction of the cost, with the challenge of making it work. The idea of the C-Tug is that it is a light weight, and portable kayak dolly that will strap to the under side when you need to move the kayak over land. I felt that the $120+ price tag was ridiculous, and set out to 3d print something of similar function, with the filament I had on hand. I do not think this is good for everybody, as some people can not tie their own shoes, but if you kayak, and want to amp up your adventure, without breaking your back, or the bank, this may help. I added the caps, to help hold the top pads on, and secure them better so I could bungee the cart to the kayak. I then used a couple of wood screws to hold them on.
| Arm_2.stl | 13.1KB | |
| CenterPin_1.stl | 433.6KB | |
| Cotterpin_3.stl | 308.7KB | |
| Kcart_cap.stl | 13.1KB | |
| kcart_Tires_Airless.stl | 2.5MB | |
| kcart_Tires_Airless_V2.stl | 2.4MB | |
| kcart_Tires_V2.stl | 920.9KB | |
| Kcart_tops_v3.stl | 408.2KB | |
| kcart_Wheels_v2.stl | 331.4KB | |
| Tire_2.stl | 918.9KB | |
| washer_3mm_3.stl | 150.5KB | |
| washer_6mm_6.stl | 150.5KB | |
| Wheelpin_2.stl | 120.0KB | |
| Wheel_2.stl | 390.2KB |
