Got tired of K Cup boxes on my counter so made this K Cup holder that mounts under the cabinet.
I used double sided tape to hold it up but it fell off in a few days. Ended up using 5mm wood screws on the 4 corners and the one in the middle. That way it has a little give when putting in the cups.
This holds 20 cups. It is 250mm x 250mm. So not for small printers.
When mounting be careful not to screw through the cabinet.
Use double sided tape to mount it then put the screws in.
Hope others can use this. It really is better than them boxes.
| 1PEza0yohz7.stl | 241.0KB |
