Juwel BioFlow 500 Filter Medium Container Set 3D Printer Model
The file 'Juwel BioFlow 500 Filter Medium Container Set 3D Printer Model' is (stl) file type, size is 2.5MB.
The file 'Juwel BioFlow 500 Filter Medium Container Set 3D Printer Model' is (stl) file type, size is 2.5MB.
This is a set of boxes and accessories for upgrading yout Juwel BioFlow Super 500 aquarium filter.
The containers can be stackes as you like and filled with any filter material, leaving you as much freedom as possible when choosing the filter media of your liking.
A center tube (13mm aquarium tubing) can be fitted to the bottom suction plate to remove any grime collecting below the media without removing the whole assembly.
Please be aware:
The upper suction port of the pump assembly plate is blocked off using these containers, so dirty filter media will inadvertendly block flow completely! Make sure to use lightly packed media only or add a hole of 26x16mm starting at 95mm from the first container's bottom for additional flow.
PS: This set is designed for optimized FDM printing without supports or overhangs, should work with SLA printing as well but you'll have to add some air holes...
Changelog:
2014-10-29 - Fixed tube dimensions on 30/40/75mm-container, lid with hole, added nipples to lid
| Juwel-Bioflow-Super-500_BottomSuctionPlate.stl | 1.0MB | |
| Juwel-Bioflow-Super-500_MediaContainer100.stl | 997.5KB | |
| Juwel-Bioflow-Super-500_MediaContainer30.stl | 997.6KB | |
| Juwel-Bioflow-Super-500_MediaContainer40.stl | 1023.5KB | |
| Juwel-Bioflow-Super-500_MediaContainer75.stl | 997.6KB | |
| Juwel-Bioflow-Super-500_UpperLidWithHole.stl | 1.5MB | |
| Juwel-Bioflow-Super-500_UpperLidWithPlug.stl | 857.4KB |
