Here are some Technic bricks I modeled up, they are pretty true dimensionally, but scaled up 5x. This is a WIP so some of the model tolerances may be off for your machine. The .STL files were made with a pretty high res so all fillets and curves should be smooth. There are several variations on a couple of models like the double pins. Just try them to see what works best for you. If any files are missing from the set shoot me a message and let me know.
Some of the large plates were modified for this set to give additional support, but I included the correct models as well if you want to use them for other things.
The 8 stud axle is split in half. The hole is sized for a piece of 3/8" threaded rod to screw it together.
| 16T_GEAR.STL | 3.1MB | |
| 1AXLE_1STUD_90DEG.STL | 2.8MB | |
| 2_HOLE_BEAM.STL | 112.6KB | |
| 2_HOLE_PLATE.STL | 455.2KB | |
| 2_STUD_AXLE.STL | 1022.1KB | |
| 2_STUD_PIN.STL | 4.3MB | |
| 2_STUD_PIN_W_HOLE.STL | 2.5MB | |
| 2_STUD_PLATE.STL | 83.8KB | |
| 3_HOLE_PLATE.STL | 1.4MB | |
| 3_STUD_AXLE.STL | 855.4KB | |
| 3_STUD_BEAM.STL | 222.0KB | |
| 3_STUD_PIN_AXLE.STL | 473.6KB | |
| 3_X_3_90_DEG_PLATE.STL | 257.5KB | |
| 3_X_3_90_DEG_PLATE_MODIFIED.STL | 320.6KB | |
| 4_STUD_AXLE.STL | 806.3KB | |
| 4_X_2_90_DEG_BEAM.STL | 311.0KB | |
| 4_X_4_135DEG_BEAM.STL | 423.5KB | |
| 5.5_AXLE.STL | 882.1KB | |
| 5X_-_4121667.STL | 4.2MB | |
| 5X_-_4121715.STL | 3.1MB | |
| 5X_-_4140430.STL | 2.3MB | |
| 5X_-_4173668.STL | 2.7MB | |
| 5X_-_4173668_RIBBED_SUPPORTS.STL | 2.8MB | |
| 5X_-_4206482.STL | 2.1MB | |
| 5X_-_4211889.STL | 3.4MB | |
| 5X_-_4514559.STL | 4.1MB | |
| 5X_-_6089119.STL | 884.9KB | |
| 5_STUD_AXLE.STL | 757.1KB | |
| 5_STUD_BEAM.STL | 328.6KB | |
| 5_X_3_90DEG_BEAM.STL | 462.6KB | |
| 6_STUD_AXLE.STL | 721.3KB | |
| 7_STUD_BEAM.STL | 423.2KB | |
| 8_SPLIT_AXLE.STL | 399.4KB | |
| AXLE_COLLAR.STL | 2.7MB | |
| AXLE_COLLAR_FINAL.STL | 991.2KB | |
| AXLE_COLLAR_FULL.STL | 2.3MB | |
| AXLE_STUD_AXLE.STL | 4.3MB | |
| BEACON_LIGHT.STL | 846.6KB | |
| CAPSTAN.STL | 1.2MB | |
| DOUBLE_BLACK_PIN.STL | 3.4MB | |
| DOUBLE_BLACK_PIN_NO_SLOT.STL | 3.5MB | |
| DOUBLE_PIN_SINGLE_HOLE_BEAM.STL | 2.9MB | |
| GRILL2.STL | 19.4KB | |
| HALF_PIN.STL | 1.9MB | |
| HOOK.STL | 1011.7KB | |
| HOOK_HALF.STL | 562.7KB | |
| PERP_BEAM_STUD_MOUNT.STL | 959.4KB | |
| PIN_BOSS_AXLE_RECEIVER.STL | 1.2MB | |
| PIN_COUPLER.STL | 134.0KB | |
| TIRE.STL | 418.0KB | |
| TRIANGLE_PLATE.STL | 411.4KB | |
| TRIANGLE_PLATE_EXTENDED.STL | 456.7KB | |
| TRIPLE_PIN.STL | 2.3MB | |
| WHEEL.STL | 188.9KB |
