NOTE: Camera mounts have been updated 2024-11-17
These are the JS-3 20mm Stack Official BMS Racing Designed TPU Parts. Compatible with JS-3 THIC 20mm Standoffs and JS-3 Type R
If you don't have access to a 3D printer, please consider supporting us by purchasing these components through official JS-3 Resellers
Important Printing Information
There are a number of variations of TPU on the market, from very soft rubbery filament through to stiffer TPU, Much like SainSmart TPU etc you need to use the stiffer material for the JS-3
You shouldn't need any supports for printing these parts. The Antenna mount does have a built in support that is easily removed.
Also note that the Foxeer Predator Nano will also fit in the HDZero Camera Mount.
For more information on this frame and assembly refer to https://bmsfpv.com
| 5mm_Spacer.stl | 89.5KB | |
| AeroCover_V3_TPU.stl | 1.8MB | |
| AeroCover_V3_Type_R_TPU.stl | 1.8MB | |
| Analog_Master_V2_45_Deg.stl | 1.9MB | |
| Analog_Master_V2_50_Deg.stl | 1.9MB | |
| Analog_Master_V2_55_Deg.stl | 1.8MB | |
| FoxeerLollipop4PlusAntMount.stl | 1.9MB | |
| FoxeerMicroLollipopMount.stl | 1.9MB | |
| HDZero_Nano90_V3_45_Deg.stl | 2.4MB | |
| HDZero_Nano90_V3_50_Deg.stl | 2.4MB | |
| HDZero_Nano90_V3_55_Deg.stl | 2.5MB | |
| TBSTriumphProMount.stl | 2.0MB | |
| TrueRCSinglarityAntMount.stl | 2.2MB |
