Journey Pillbox 3D Printer Model
The file 'Journey Pillbox 3D Printer Model' is (stl) file type, size is 934.6KB.
The file 'Journey Pillbox 3D Printer Model' is (stl) file type, size is 934.6KB.
Pillbox which can be configured to the length you need for a journey. I had the problem of making trips a few days longer than a week so that standard pillboxes were too small.
So I designed and printed this one.
The compartments can be connected with bayonet couplings to make a pillbox for as many days as you need. A special top and bottom compartment can be used to form a lid for the top compartment and a cap for the bayonet coupling of the bottom compartment.
I printed it with clear PETg hoping that will be the best for storing pills for a couple of weeks. Also PETg is quite good when it comes to being a bit springy without breaking. I thin PLA maybe not sufficient because of this. But prove me wrong an post your makes here.
I tried to use a clearance of 0.3mm in my design. So make sure your printer is set up to be significantly more exact than this to get a working product.
Print as many of the GrundkoerperXX (basic element XX= abbreviation of the day in German) elements as you need one for each day a journey might take. Additionally print one Deckel (the lid) and one Fuss (the bottom bayonet cap)
| Deckel.stl | 509.8KB | |
| Fuss.stl | 228.6KB | |
| GrundkörperDI.stl | 373.6KB | |
| GrundkörperDO.stl | 396.5KB | |
| GrundkörperFR.stl | 377.7KB | |
| GrundkörperMI.stl | 362.3KB | |
| GrundkörperMO.stl | 392.8KB | |
| GrundkörperSA.stl | 390.3KB | |
| GrundkörperSO.stl | 410.7KB |
