This is an attachment that can be mounted on a yard sign that was created from a picture of Josh Allen hurdling.
Print two, one normally and one can mirror to fip it to the other side. Two connectors are used with some superglue to hold both pieces together.
I painted some of the edges to make the lines stand out a bit better.
The hole is wide enough for something about 7mm across to fit through. I used some automotive fasteners that I found in the garage. Really, a nut/bolt and some washers would also work fine. That or possibly some wire or string to loop through both holes. The dimensions on the fasteners I used are:
Head: 17.2 mm
Width: 7.7 mm
Length: 20 mm
| Josh_Allen_Sign_1.stl | 661.7KB | |
| Josh_Allen_Sign_2_v1.2.stl | 1.5MB | |
| Josh_Allen_Sign_Connector.stl | 5.4KB | |
| Josh_Allen_Sign_Connector_v1.2.stl | 3.8KB |
![Beer Yeast Separation Funnel Using Erlenmeyer [Customizable] 3D Printer Model](https://cdn.3axis.co/assets/26/28/ba/bf/2628babf-5264-48d4-a6a6-bf2f7a68f55c/images/534046e7-64a7-4d78-bc31-d2a1fd092da0_thumb.jpg)
