JL Wrangler Fender Clip 3D Printer Model
The file 'JL Wrangler Fender Clip 3D Printer Model' is (stl) file type, size is 54.2KB.
The file 'JL Wrangler Fender Clip 3D Printer Model' is (stl) file type, size is 54.2KB.
This is a useable fender clip to replace the clips that naturally break every time that you pull the fender off of your 2018+ Jeep JL Wrangler.
I suggest printing this in a strong and high temperature material, not PLA. I printed mine in PETG. I also used a horizontal expansion of -0.2 (found under the shell settings in Cura) to make sure that I had very clean spacing.
This is a remix of the JK design to reduce the size of the center support pin to fit in the slots of the JL Wrangler's fenders.
There are two versions, one that is the full clip. This one will require a raft and supports to print. I found that removing the supports tended to destroy 50% of the prints and left the edges looking bad. The other, I rotated and removed the bottom portion of the clip so that it can print as-is without supports or adhesion help.
I modified the original version in Tinkercad. Feel free to continue my work there....
https://www.tinkercad.com/things/8kl12vJvaZh-tremendous-amur/edit?sharecode=9WcZqMKbzhmJW60IvATBwMqJEhrcp3aFDHIVL3JvS_Q
| JL_Wrangler_Fender_Clip_-_Clipped_-_No_Supports.stl | 81.8KB | |
| JL_Wrangler_Fender_Clip_-_Full.stl | 90.2KB |
