Changed "Landtow_Denmark" design of the "JK BMS Screen holder" with TinkerCad so the big JK-BMS 4.3 inch display can be mounted to a flat surface.
Made it "high" enough so the original JK-BMS button can be fitted without the cables beeing bend too much and an opening for the wiring to the BMS to exit.
Designed to be printed without any supports.
The through-holes are ca. 5,5mm in diameter and are bevelled on the top, so wood screws can be sunk flush with the housing front.
| JK-BMS_4.3_Display_-_flat_mount.stl | 106.1KB |
