Jinhao Nib Unit Protective Case V1 3D Printer Model
The file 'Jinhao Nib Unit Protective Case V1 3D Printer Model' is (stl) file type, size is 945.0KB.
The file 'Jinhao Nib Unit Protective Case V1 3D Printer Model' is (stl) file type, size is 945.0KB.
OK, like the Hongdian nib holder https://www.thingiverse.com/thing:6626432 this is one for Jinhao nib units.
The three sizes I have are #8, #6, and #5. Like the Hongdian variant, the #5/#6 is a single container, and the #8 is a separate conatiner.
I printed these with PLA using a 0.4mm nozzle and 0.08 layer height, no supports. The threads on the #5 nib unit are 0.7mm pitch, so I think you need a very thing layer height to be successful with these threads.
One other new addition, I added inset text on the bottom J (for Jinhao) and either 8 or 5/6 to denote size. Somewhat helpful so you don't have to open each case to find the one you want (at least brand).
| JinhaoNo5_6NibHolder-Body.stl | 680.5KB | |
| JinhaoNo5_6NibHolder-Cap.stl | 546.6KB | |
| JinhaoNo8NibHolder-Body.stl | 292.2KB | |
| JinhaoNo8NibHolder-Cap.stl | 541.9KB |
