Jimbo The Robot 3D Printer Model
The file 'Jimbo The Robot 3D Printer Model' is (stl) file type, size is 382.7KB.
The file 'Jimbo The Robot 3D Printer Model' is (stl) file type, size is 382.7KB.
I wanted to create a poseable action figure that was easy and reliable to print.
I also wanted it to be easy for others to remix and add to. Feel free to add whatever you want to him. I'll certainly add some armaments at some point.
The parts are all press fit beveled octagonal pegs and circular holes, making for a surprisingly firm fit. The holes are 10mm in diameter, as are the pegs (between opposing vertices).
The pegs are tough to get into the holes by design. I used a hammer to assemble mine.
Jimbo ends up about 7in tall.
Chest x1
Hips x1
Head x1
Foot x2
Hand x2
Shoulder/Hip Cap x4
Limb Panel (Pegs) x4
Limb Panel (Holes) x8
All parts print without supports except the chest and hips.
Please post pics if you print and/or remix it!
| Jimbo_Chest.stl | 127.2KB | |
| Jimbo_Foot.stl | 25.9KB | |
| Jimbo_Hand.stl | 29.4KB | |
| Jimbo_Head.stl | 169.8KB | |
| Jimbo_Hips.stl | 54.2KB | |
| Jimbo_Limb_Panel_Holes.stl | 51.0KB | |
| Jimbo_Limb_Panel_Pegs.stl | 30.3KB | |
| Jimbo_ShoulderHip_Cap.stl | 24.9KB | |
| Jimbo_the_Robot.stl | 929.8KB |
