This box battery work with JiGuan TC 50w board.
I take the board here for 18$: https://www.fasttech.com/p/3717200
In the board i cut the bluetooth push button and the bluetooth antenna.
To mount this mod u need:
I printed the body and the door in vertical with support using 150 micron but u can use 200 micron too.
If u print PLA in vertical i suggest the raft, especially for the door (!).
There are 3 version of body with 3 different connector hole (10, 12 and 13 mm): Fatdaddy is 10 mm.
U can find some extra photos here:
http://www.esigblog.com/jiguan-tc-50w-box-battery-stampante-3d
| body_hole_10_mm.stl | 814.0KB | |
| body_hole_12_mm.stl | 817.6KB | |
| body_hole_13_mm.stl | 819.1KB | |
| door.stl | 168.6KB | |
| fire.stl | 254.3KB | |
| front_panel.stl | 388.0KB | |
| updownx2.stl | 237.5KB |
