Jig For K1 Max Silicon Bed Plate Column 3D Printer Model
The file 'Jig For K1 Max Silicon Bed Plate Column 3D Printer Model' is (STL) file type, size is 2.0MB.
The file 'Jig For K1 Max Silicon Bed Plate Column 3D Printer Model' is (STL) file type, size is 2.0MB.
Hello,
this is a jig to cut the aftermarket silicon column for 3d printer bedplate, since for my K1 max the column height measure is 12 mm and it is not easy to find e buy locally i made the jig to cut properly a 18 mm column that is typical for 3d printer.
Very easy to use put the column on Cutter Jig (I added 3 different length 10-11-12 mm), after that tighten the plug, not heavily, just to arrive to the surface and after that by manual cutter with new blade, cut it.
In addition, if you want make a column by yourself, i added a disposal mold, buy a Motorsil silicon and feed the mold, when it is dried, destroy the mold and you will have a perfect column.
Regards
Jonweb
| Column_disposable_jig.STL | 93.1KB | |
| Cutter_Jig.STL | 673.9KB | |
| Cutter_Jig_10_mm.STL | 749.3KB | |
| Cutter_Jig_11_mm.STL | 758.7KB | |
| Cutter_Jig_12mm.STL | 769.2KB | |
| Cutter_Jig_9__mm.STL | 753.0KB | |
| Plug.STL | 872.3KB |
