The file 'Jewelry Carousel . Modular . Ring – Earring – Neacklace . Organizer . Display Stand . Fully 3D Printable . Print 3D Printer Model' is (stl) file type, size is 3.1MB.
A modular jewlry carousel
The necklaces can be put on the "p1 ring thing"
This carousel need a 608 bearing
3D printable 608 bearings sort of:
https://www.thingiverse.com/thing:2260689
Tested with "bearing-tighter"
Please Like, Post a make, Comment, Give me a tip
with the tip system of thingiverse
https://www.thingiverse.com/Kaaa/about
| jewelry_carousel_p1_1.0_heartV_rings_thing.stl | 1.3MB | |
| jewelry_carousel_p1_1.0_rings_thing.stl | 1.3MB | |
| jewelry_carousel_p1_1.1_finer.stl | 658.4KB | |
| jewelry_carousel_p1_1.1_finer_heartV.stl | 818.4KB | |
| jewelry_carousel_p1_1.2.stl | 656.9KB | |
| jewelry_carousel_p1_1.2_heartV.stl | 816.5KB | |
| jewelry_carousel_p1_1.3_holesV_.stl | 758.0KB | |
| jewelry_carousel_p1_1.3_holesV_heartV.stl | 920.1KB | |
| jewelry_carousel_p2_1.0_3.7cm_standard_spacer.stl | 197.0KB | |
| jewelry_carousel_p2_1.0_5.2cm_spacer.stl | 201.1KB | |
| jewelry_carousel_p2_1.0_7.3cm_spacer.stl | 200.0KB | |
| jewelry_carousel_p3_1.0.stl | 81.9KB | |
| jewelry_carousel_p4_1.1_2.2cm_standard_spacer.stl | 219.4KB | |
| jewelry_carousel_p4_1.1_2.9cm_spacer.stl | 143.9KB | |
| jewelry_carousel_p5_1.1.stl | 286.8KB | |
| jewelry_carousel_p6_1.11.5cm_far_from_the_arm.stl | 307.6KB | |
| jewelry_carousel_p6_1.2_standard3.5cm_far_from_the_arm.stl | 307.5KB | |
| jewelry_carousel_p7_1.0_just_a_nut.stl | 45.7KB | |
| jewelry_carousel_p7_1.1.stl | 86.9KB | |
| jewelry_carousel_p7_1.1_heartV.stl | 172.8KB | |
| jewelry_carousel_p8_1.11.5cm_far_from_the_arm_3diskV_16.7cmH_.stl | 29.2KB | |
| jewelry_carousel_p8_1.11.5cm_far_from_the_arm_4diskV_20.8cmH_.stl | 29.0KB | |
| jewelry_carousel_p8_1.11.5cm_far_from_the_arm_heartV_3diskV_16.7cmH_.stl | 94.1KB | |
| jewelry_carousel_p8_1.11.5cm_far_from_the_arm_heartV_4diskV_20.8cmH_.stl | 94.1KB | |
| jewelry_carousel_p8_1.2_standard3.5cm_far_from_the_arm_3diskV_16.7cmH_.stl | 29.2KB | |
| jewelry_carousel_p8_1.2_standard3.5cm_far_from_the_arm_heartV_3diskV_16.7cmH_.stl | 93.7KB | |
| jewelry_carousel_p8_1.2_standard3.5cm_far_from_the_arm_heartV_4diskV_20.8cmH_.stl | 94.2KB |
