Jewelled Bracelet 3D Printer Model
The file 'Jewelled Bracelet 3D Printer Model' is (stl) file type, size is 158.9KB.
The file 'Jewelled Bracelet 3D Printer Model' is (stl) file type, size is 158.9KB.
This is a print in place bracelet with a jewel. There are two versions, one for 3mm magnets and another with a plastic clasp already in the design. Both are to fit a wrist that is roughly 16/17cm in circumference or smaller.
When printed, the bracelet should be gently flexed to help separate the links. They should bend enough to complete a circle, but don't bend them too sharply or it'll snap. The jewel can be glued into the socket.
I've tried to keep it thin enough to be usable, but thick enough that it won't immediately fall apart. There is also a test piece you can print out first before printing the whole bracelet.
| inner.stl | 15.2KB | |
| Jewelled_Bracelet_Clasp_1.stl | 346.6KB | |
| Jewelled_Bracelet_Jewel.stl | 8.5KB | |
| Jewelled_Bracelet_magnet.stl | 335.9KB | |
| outer.stl | 5.0KB | |
| outer_with_link.stl | 25.5KB | |
| test_links.stl | 37.0KB |
