UNTESTED!!!
I designed this based on the high speed fans you see everywhere online with a spare motor i had i used a T-motor f40 but you can also use a motor with the dimensions you cann find at the model's pictures.
1.For the propeller use infil 100% and 0.16 layer height and 4 walls
2.For the main body use 25 bottom layers and 4 walls.
3.For the other parts use 30-40% infill and 3 walls
ESC:https://www.kavanrc.com/en/item/kavan-r-50sb-plus-brushless-esc-sbec-50a-153745
| battery-esc.stl | 95.3KB | |
| bat_cover.stl | 2.2KB | |
| fan_cover.stl | 126.4KB | |
| jet_fan_v3.f3d | 4.7MB | |
| main_body.stl | 216.9KB | |
| propeller.stl | 410.3KB |
