Jet Engine 60% Scale 3D Printer Model
The file 'Jet Engine 60% Scale 3D Printer Model' is (stl) file type, size is 31.3MB.
The file 'Jet Engine 60% Scale 3D Printer Model' is (stl) file type, size is 31.3MB.
A 60% scale version of the 3D Printable Jet Engine by CATIAV5FTW. I printed the full size version first, but it is so large, I wanted a smaller version to give to a friend as a gift. I resized the pieces and adjusted them to use the same hardware screws as the original model, but smaller bearings. Only the modified files are included, the rest can be downloaded from the original post.
The bearings are 10x22x6mm and 12x28x8mm (6001) that were purchased off of ebay.
| Combustion_and_HPT_Casing.stl | 2.3MB | |
| Cowling_Front.stl | 223.2KB | |
| Cowling_Pin.stl | 83.0KB | |
| Cowling_Rear.stl | 1.2MB | |
| Fan_Casing.stl | 2.4MB | |
| Fan_No_Supports.stl | 19.6MB | |
| Fan_Stator_Casing_and_Support_No_Supports.stl | 12.3MB | |
| HPC_Spool.stl | 2.2MB | |
| HPT_No_Supports.stl | 3.8MB | |
| HP_Core_Casing.stl | 1.9MB | |
| Low_Pressure_Shaft_Aft_Rev_A.stl | 796.9KB | |
| Low_Pressure_Shaft_Front_Rev_A.stl | 497.8KB | |
| LPT_Casing.stl | 2.3MB | |
| LPT_Spool.stl | 1.2MB | |
| Mixer.stl | 14.5MB | |
| Nozzle_No_Supports.stl | 8.3MB | |
| Stand_Ellipses.stl | 4.7MB |
