I HAVE MOVED TO GRABCAD
COME JOIN ME THERE
https://grabcad.com/yohann.panthakee-1
I made this.This was a challenge I set myself. I wanted to advance my Cad skills so I challenged myself to make a jet engine.
Please share my design to any friends or family members who enjoy and find engineering interesting.
You will need to buy:
http://www.amazon.co.uk/Double-Shields-Groove-Bearings-8x22x7mm/dp/B00K85EY22/ref=pd_sim_200_7?ie=UTF8&dpID=41c8jC72QUL&dpSrc=sims&preST=_AC_UL160_SR160%2C160_&refRID=0HKD12YVC4C8MMDVSR0S
Tools
A set of files
Sand paper
By Yohann Panthakee
| bolt.stl | 157.0KB | |
| combustion-chamber.stl | 209.9KB | |
| compressor-wheel.stl | 135.2KB | |
| end-plate.stl | 23.5KB | |
| exaust-chamber.stl | 23.7KB | |
| front-pin.stl | 3.4KB | |
| Front_case.stl | 46.7KB | |
| Front_pin.stl | 3.4KB | |
| Gas_distribution_ring.stl | 70.7KB | |
| Inner_fuel_ring.stl | 42.3KB | |
| Jet_case.stl | 15.3KB | |
| nut.stl | 53.9KB | |
| shaft.stl | 11.2KB | |
| stater-turbine.stl | 158.1KB | |
| Stater_plate.stl | 20.4KB | |
| Stater_wheel.stl | 84.3KB |
