Work in progress.
Fire boat / work boat.
Initially wanted to build something like Palfinger PB-950A boat, but I found nice hull on thingiverse and slightly redesigned it.
Hull complete - does not include all modifications. Attached to give impression what this design is about.
Karol generously printed it for me (as other projects...). Thank you Karol! :)
R - files - printed red.
G - files - printed grey.
X- files - main hull cut in 3 pieces - play it as you wish.
Settings:
10% infill
Outcome: bit heavy :) will see how it behaves on water... :)
Jet drive - Graupner mini jet. Still available in Graupner shop. (https://www.graupner.com/Mini-Jet-complete-set/2349/).
I plan to install water pump for fire hose... Will see how it works.
Revision 1.
Some sanding was required to smooth the hull.
to be continued...
| G1_Door.stl | 2.2KB | |
| G2_Windows_side.stl | 15.7KB | |
| G2_Window_front_1.stl | 12.3KB | |
| G3_Window_front_2.stl | 10.0KB | |
| G4_Window_front_3.stl | 25.8KB | |
| G5_Windows_back.stl | 15.3KB | |
| G6_Roof.stl | 10.2KB | |
| G7_cargo_deck_1.stl | 10.8KB | |
| G7_cargo_deck_2.stl | 12.4KB | |
| G8_pump_holder.stl | 11.5KB | |
| R1_main_body.stl | 49.1KB | |
| R2_main_body.stl | 60.2KB | |
| R3_main_body.stl | 96.5KB | |
| R4_main_body.stl | 365.4KB | |
| R5_main_body.stl | 273.9KB | |
| R6_main_body.stl | 504.5KB | |
| R7_Window_Center.stl | 20.4KB | |
| R7_Window_Left.stl | 18.9KB | |
| R7_Window_Left_side.stl | 100.3KB | |
| R7_Window_Right.stl | 16.4KB | |
| R7_Window_Right_side.stl | 100.0KB | |
| R8_fire_hose.stl | 215.6KB | |
| X1_Hull_complete.stl | 411.6KB | |
| X2_front.stl | 201.9KB | |
| X3_mid.stl | 80.3KB | |
| X4_rear.stl | 59.1KB |
