JessEm Compatible Ring Inserts For Router Lifts 3D Printer Model
The file 'JessEm Compatible Ring Inserts For Router Lifts 3D Printer Model' is (STL) file type, size is 8.7MB.
The file 'JessEm Compatible Ring Inserts For Router Lifts 3D Printer Model' is (STL) file type, size is 8.7MB.
I needed to replace a couple of the ring inserts on my JessEm Mast-R-Lift router table, but I wanted to see if I could duplicate it instead of just buying one because, well. . . I can.
So, I was able to successfully duplicate the insert plate, and then I made it parametric, so I just had to put in the diameter of the hole, and everything else was automatic. Then, I decided to put numbers on them to easily differentiate them.
These plates work perfectly with the JessEm Mast-R-Lift I have, and the wrench fits without issue as well. The texture on the top surface is from the Prusa textured print bed surface, which I really like.
Do not use supports. Prusaslicer complains, but they print just fine without supports. I have been using them for a couple of weeks without issue. I printed them in PLA and PETG. The PLA ones are more rigid, so that is what I ended up printing all of mine in. They were printed with 4 perimeters, 6 top and bottom layers, and 30% gyroid infill (what little infill there is).
They are numbered from 1 to 10, and the number is the diameter of the hole, in 4ths of an inch.
1 = 1/4" 2 = 1/2" 3 = 3/4" . . . 9 = 2-1/4" 10 = 2-1/2"
I also designed and printed a holder for them, since I wanted them to be mounted on my wall.
| Jess-Em_Router_Table_Insert_-_0.25in.STL | 2.3MB | |
| Jess-Em_Router_Table_Insert_-_0.50in.STL | 2.5MB | |
| Jess-Em_Router_Table_Insert_-_0.75in.STL | 2.6MB | |
| Jess-Em_Router_Table_Insert_-_1.00in.STL | 2.6MB | |
| Jess-Em_Router_Table_Insert_-_1.25in.STL | 2.7MB | |
| Jess-Em_Router_Table_Insert_-_1.50in.STL | 2.7MB | |
| Jess-Em_Router_Table_Insert_-_1.75in.STL | 2.7MB | |
| Jess-Em_Router_Table_Insert_-_2.00in.STL | 2.8MB | |
| Jess-Em_Router_Table_Insert_-_2.25in.STL | 2.8MB | |
| Jess-Em_Router_Table_Insert_-_2.50in.STL | 2.8MB |
