This is a box used to store jenga blocks. It is also used as guide to help stack the blocks so they are perfectly aligned. Once the blocks have been placed in the box, you can tilt it over and lift the box off upside down to reveal a perfect stack of blocks.
Youtube video:
https://www.youtube.com/watch?v=cCqizVsbFiU
To store blocks in box, put in the sides and lid. The next time you wanna play, it'll be perfectly stacked for the first game.
The box is roughly 27cm tall and since my 3D print has a maximum limit of 20cm, I divided the box in half. Print both sections and glue them together with super glue or acetone (preferred). One of the sliding sides is also too long to print so I divided it into 2 sections. Glue the top lip to the top of the box so it can hold the lid in place.
| jenga-box-bottom-v1.stl | 13.4KB | |
| jenga-box-middle-v1.stl | 15.5KB | |
| jenga-box-side-v1.stl | 2.6KB | |
| jenga-box-top-face-v1.stl | 2.3KB | |
| jenga-box-top-v1.stl | 14.9KB |
