I made this in 123D Design, I printed the Box in Hatchbox 1.75mm wood pla. I uploaded all of my original designs. The ones you want to print are V10 (and both Buttons) feel free to tinker with my old designs. I used wood filler to fill the gaps and sanded it down to give it a nice wood finish, I have yet to stain it but will update picture when I do. The only problem I had while designing this was I could not get the charging port hole, I driled a hole in the box and molded it using wood filler and worked really well. I recomend putting tape behind the buttons to keep them from sticking, I used Kapton tape. happy vaping post pictures if you decide to make it.
| Button_V1.stl | 134.7KB | |
| Fire_Buttone_V1.stl | 46.2KB | |
| Jelly_fish_v10.stl | 1.7MB | |
| Jelly_fish_v2.stl | 363.4KB | |
| Jelly_fish_v3.stl | 400.1KB | |
| Jelly_fish_v4.stl | 521.2KB | |
| Jelly_fish_v5.stl | 483.7KB | |
| Jelly_fish_v6.stl | 1007.9KB | |
| Jelly_fish_v7.stl | 1.1MB | |
| Jelly_fish_v8.stl | 1.1MB | |
| Jelly_fish_v9.stl | 1.2MB |
