Made this to add a 2nd 12v lighter for my TJ. Allows you to keep the existing or add 2 new ones.
Wire it up to the existing using T-Taps
Used these from Amazon.
Cut out the holes using the mounts as a template. Dremel works best at low speed. Showed are 2 different colors. The black goes in the front in between the sockets and the switch bracket. The blue is placed behind it to give the nut something to grab onto as well as keep it tight. Use superglue if keeping the factory lighter socket.
The front is beveled to fit into the bracket.
| Wrangler_TJ_2_Port_Lighter_-_with_original_lighter.stl | 115.5KB | |
| Wrangler_TJ_2_Port_Lighter_Backplate.stl | 113.7KB |
