Jeep Wrangler Anti Flap Seat Belt 3D Printer Model
The file 'Jeep Wrangler Anti Flap Seat Belt 3D Printer Model' is (stl) file type, size is 58.2KB.
The file 'Jeep Wrangler Anti Flap Seat Belt 3D Printer Model' is (stl) file type, size is 58.2KB.
When you remove the doors off of a Jeep Wrangler (The one this was made for was a 2016 but I assume it might work for other years) the seat belts flap annoyingly in the wind. I designed this in an attempt to reduce the flapping by giving it a channel to sit in but also allow the belt to move freely. The top slides over the top of the plastic and the mid is adhered midway down the plastic. I used a double sided command strip. This still needs some work because the top needs to be a little tighter and the command strip did not last but a week.
DISCLAIMER: I am not an expert and am not responsible if you use this on your jeep. This is just my personal solution that might not be a good idea or safe.
USE AT YOUR OWN RISK!
Update: Both Pieces could use a thicker outside flap as they flexed in the wind so I added a V2 of both objects. I also added a longer flap that goes inside of the plastic on the top to give it a better grip. I will try to update tomorrow.
| Anti_Flap_Top.stl | 84.8KB | |
| Anti_Flap_Top_V2.stl | 64.1KB | |
| Anti_Flop_Mid.stl | 4.6KB | |
| Anti_Flop_Mid_V2.stl | 14.6KB |
