This iPad mounting solution is working with 67 Design rail.
I used 3/8 x16, 12'' threaded rod with nuts x8.
iPad holder w/ apple pencil holder, with 20mm ball mount, will work with 67 design mount.
Fits 170-187mm iPad w/ or w/o case.
Mounting parts with 67 Design rail can be found here https://www.thingiverse.com/thing:4197841
Max part length is 105mm, small printer-friendly.
To achieve better look, gonna find a solution to cover the shining rod
PLA is working ok, not sure it will survive in summer. Some of the early prints have shown the deformation due to the higher temperature, which will course loose parts and vibration.
ABS, PETG and anything that has a higher deformation temperature is recommended.
| iPad-back_plate.stl | 217.3KB | |
| iPad-L.stl | 1.9MB | |
| iPad-Mount.stl | 1.6MB | |
| iPad-R.stl | 1.9MB | |
| iPad-rotator2.stl | 1.6MB | |
| iPad-rotator_1.stl | 1.2MB | |
| iPad-rotator_insert.stl | 930.8KB | |
| Nut-ball.stl | 1.9MB | |
| nut_bar.stl | 1.4MB | |
| nut_end.stl | 2.4MB |
