Jeep AMC 4.0L I6 Engine & Transmission 3D Printer Model
The file 'Jeep AMC 4.0L I6 Engine & Transmission 3D Printer Model' is (stl) file type, size is 21.7MB.
The file 'Jeep AMC 4.0L I6 Engine & Transmission 3D Printer Model' is (stl) file type, size is 21.7MB.
This is a replacement for the kit transmission of an Axial SCX10.2. It bolts to a stock skid plate. Motor mounts need to be added to mount it up front. It uses stock transmission internals. I did have to purchase two aftermarket pinions (12T for the motor, 45T/48P-5mm dia. pinion for the ‘spur’). I use 3mm hardware to assemble the entire motor. No gluing.
Here is the link for the stock SCX10.2 transmission:
http://www.axialracing.com/blog_posts/1073925465
http://www.robinsonracing.com/catalog/5mm_pinion.html
http://www.robinsonracing.com/catalog/one_eight_inch_bore_pinions.html
**I am no longer updating the parts.
| 40_i6_Head.stl | 1.5MB | |
| 40_i6_Valve_Cover.stl | 1.1MB | |
| Accessory_Bracket.stl | 406.2KB | |
| Alternator.stl | 1.7MB | |
| Alternator_Bracket.stl | 1.6MB | |
| Bell_Housing.stl | 4.3MB | |
| Block_Left.stl | 6.6MB | |
| Block_Right.stl | 10.7MB | |
| Cap.stl | 3.1MB | |
| ColdAirIntake.stl | 1.4MB | |
| Distributor.stl | 639.3KB | |
| Manifolds.stl | 13.2MB | |
| Motor_Mounts.stl | 182.5KB | |
| Oil_Filter.stl | 565.2KB | |
| Pulleys.stl | 944.0KB | |
| Starter.stl | 179.8KB | |
| Throttle_Body.stl | 5.5MB | |
| TransferCase.stl | 1.5MB | |
| Transmission_Case.stl | 1.3MB |
