JDC AX1800 PRO TOM MOD 3D Printer Model
The file 'JDC AX1800 PRO TOM MOD 3D Printer Model' is (stl) file type, size is 3.7MB.
The file 'JDC AX1800 PRO TOM MOD 3D Printer Model' is (stl) file type, size is 3.7MB.
这个MOD可用于JDC AX1800PRO路由器。
目前这个MOD包含3个部分，打印完成后组装好即可使用。
组装难度不高，拆完后就是打螺丝。
所需材料：
测试结果：
OPENWRT固件，室温25C，温度在62~65C.
--注意：分享STL图纸需要注明出处。
主板这边使用m3*16的沉头螺丝，然后用m3的螺母固定。
清单里面忘了这个。
This MOD can be used with JDC AX1800PRO router.
Currently, this MOD contains 3 parts, which can be assembled and used after printing.
Assembly is not difficult, just screw in after disassembly.
materials needed:
Test Results:
OpenWRT firmware, room temperature is 25C, temperature is 62~65C.
--Note: When sharing STL, you need to indicate the source.
| ax1800a.stl | 9.0MB | |
| ax1800b.stl | 6.2MB | |
| ax1800c.stl | 9.1MB |
