I tried JAYO filament, I was pleasantly pleased with the even winding, 10% weight bonus and a drawn thread consumption scale. But there is one drawback - paper made from spool crumbles directly onto the filament during printing, increasing contamination in the extruder. I was looking for something similar but all the models were large and complex or did not fit. After many trials, I settled on this particular size of adapter, it fits perfectly into the JAYO spool and you will never have this trouble.
After finishing spool, they can be rearranged into a new one!
No glue required!
OUTER diameter -60.03 mm
Landing diameter spool 54.55 mm
Internal diameter 49 mm
Print 2 pieces, insert one on each side of the spool until it stops.
Happy printing!
Layer height 0.2
Walls 6
Bottom and cover 4
PETG, PLA
100% filling
No support.
Time about 14 min
| JAYO_Spool_adapter.stl | 320.4KB |
