Model of Czech motorbike Jawa 250 (cca 1960).
It's semiscale, it's not perfect shapes as original. movable wheels and steering . For spoke use 0,6mm steel wire and montage in pripravek_kolo.stl. some M2x6 screw fot complete and CA glue. Thinking about complete. It's little chaos :)
The model is free, but small tips will please.
UPDATE 3:
adde Jawa one part v4 - optimalize model for DLP printer 2
UPDATE 2:
adde Jawa one part v2 - optimalize model for DLP printer
UPDATE:
added complete model in one part for resin printers
| brzdova_paka.STL | 26.4KB | |
| Jawa_final-1telo.STL | 19.5MB | |
| jawa_onepart-v4.STL | 8.5MB | |
| kaplicka1.STL | 5.2MB | |
| kaplicka2.STL | 2.2MB | |
| klakson.STL | 378.7KB | |
| kryci_plech.STL | 2.5MB | |
| kryt_kola.STL | 123.4KB | |
| kryt_kola_zadni.STL | 799.8KB | |
| kryt_retezu1.STL | 135.4KB | |
| kryt_retezu2.STL | 120.0KB | |
| kryt_zadniho_kola_2.STL | 700.9KB | |
| motor1.STL | 876.6KB | |
| motor2.STL | 1.3MB | |
| motor3.STL | 1.3MB | |
| naboj1.STL | 546.7KB | |
| naboj2.STL | 546.4KB | |
| nadrz1.STL | 171.8KB | |
| nadrz2.STL | 1.1MB | |
| nadrz3.STL | 61.9KB | |
| nadrz4.STL | 63.4KB | |
| pneu.STL | 845.7KB | |
| prednisvetlo.STL | 1.6MB | |
| predni_blatnik.STL | 679.0KB | |
| predni_kolo.STL | 565.9KB | |
| predni_vidlice.STL | 27.7KB | |
| predni_vidlice_2.STL | 62.3KB | |
| pripravek_kolo.STL | 110.6KB | |
| radici_paka.STL | 68.0KB | |
| ram1.STL | 14.5KB | |
| ram2.STL | 50.8KB | |
| ram3.STL | 15.1KB | |
| riditka.STL | 291.0KB | |
| sedlo.STL | 1.1MB | |
| spinaciksrinka.STL | 167.4KB | |
| stojan.STL | 722.0KB | |
| stupacka.STL | 21.5KB | |
| stupacky_predni.STL | 43.7KB | |
| tachometr.STL | 550.6KB | |
| tlumic_spodek.STL | 27.1KB | |
| vicko2.STL | 410.9KB | |
| vicko_nadrze.STL | 25.3KB | |
| vyfuky.STL | 512.7KB | |
| vyfuk_koleno.STL | 2.4MB | |
| vyfuk_krouzek.STL | 1.0MB | |
| zadni_blatnik_final.STL | 2.0MB | |
| zadni_kyvacka.STL | 171.8KB | |
| zadni_tlumic.STL | 62.1KB | |
| zadni_tlumic_dil2.STL | 23.9KB |
