Japanese Lantern Tealight 3D Printer Model
The file 'Japanese Lantern Tealight 3D Printer Model' is (stl) file type, size is 826.4KB.
The file 'Japanese Lantern Tealight 3D Printer Model' is (stl) file type, size is 826.4KB.
This model is for personal use only. Do not sell this model or prints of this model. For licensing this model to print and sell, shoot me an email at [email protected]
If you make this and post it on social media, state it was made using my files. Thanks!
Designed this for our Kokko Kitsune Custom Doll Akino. Fits a slightly sanded tealight from Kik (shop we have in Poland, pretty sure some tealights will also fit these dimensions, circuitboard roughly 23mm in diameter).
Assembly guide can be found in the video: https://www.youtube.com/watch?v=gHWpVK7FcBc
For the windows I used 1mm acrylic sheet sanded on both sides and cut to 11mm x 22mm, superglued in place, then the top can be secured with superglue as well. The top has plenty of clearence for the prongs to fit in.
The cap is reversible. The sticking out part goes in when you want it on, the flat side towards the battery when off. Haven't tested the new cap design but it should work (I used a plastic spacer in the video).
If you enjoyed this model and you're able, any tip will be apreciated, thanks!
| body.stl | 185.5KB | |
| cap.stl | 87.8KB | |
| top.stl | 1.1MB | |
| top_with_hole.stl | 1.1MB |
