Three piece lantern printable without support, the pieces snap together. Designed as a corded lamp, a candelabra base (E12) socket with metal clip snaps into the base, a standardized part which is readily available online.
Multiple sizes, XYZ dimensions in mm:
100% Scale 222, 222, 280
91% Scale 202, 202, 255 (Fills Ultimaker original printbed)
80% Scale 178, 178, 225
The 100% version has a STL with a no-socket base that can be scaled for a lantern of any size. The versions with sockets must be built as scaled. Low wattage bulbs recommended. Photographed model was built with 0.2mm layers and 15% infill. It was spray painted with primer and a textured stone paint (American Accents from Rustoleum).
Please consider sharing a make!
Update 1/19/22:
New files for "top". These have been repaired and will slice more reliably.
| 80_Base_With_Socket.stl |
| 80_Center.stl |
| 80_Top.stl |
| 80_Top_Repaired.3mf |
| 91_Center.stl |
| 91_Top.stl |
| 91_Top_Repaired.3mf |
| 91__Base_With_Socket.stl |
| Base_No_Socket.stl |
| Base_With_Socket.stl |
| Center.stl |
| Top.stl |
| Top_Repaired.3mf |
