The file 'Jango Fett Style Mandalorian Helmet (The Drop Bear) – Built-in Cooling – 3x Sizes By AprilStorm 3D Printer Model' is (zip,pdf,stl) file type, size is 8.0 MB.
These are the files for the "Drop Bear" Mandalorian Helmet It has some distinct advantages over other 3D printable helmets in that it has been designed to be
Download and expand the zip files for alternative sizes
It comes with built in cooling ducts (optionally fitted with 2 speed USB Powered ducted fans that sit in purpose design holders in the cheeks of the helmet, they have covers so your hair will not get caught in the fan and extract air from the outside of the helmet and blow it out over the visor area, this will mean you remain cooler longer and your visor should not fog up.
Provison for two rocker switches that can be accessed easily while wearing the helmet. If you choose an option with fans, one will be occupied with a 3 position switch for the fans. The other is spare and can be used for future upgrades (for example voice amp or RF motor)
Multiple RF Styles
Multiple Earcap Styles
Pilot Blast Shield and accessories
Template for Removable Visor Included
Sizing:
Use the images supplied for scaling but most adult males are M. S is roughly the same size as a rubies 2 piece jango, and the L is really an XL sized helmet and should only be needed if you are an above average build or have a larger than average head. The S/M/L is roughly based on Bell Motorcycle helmet sizing (full face)
FOR PERSONAL NON COMMERCICIAL USE ONLY
| AprilStorm_DropBear_Accessories.zip |
| AprilStorm_DropBear_Large.zip |
| AprilStorm_DropBear_Med.zip |
| AprilStorm_DropBear_Small.zip |
| AprilStorm_FennRau_Accessories_Medium.zip |
| DropBearVisor_MediumV3.pdf |
| DropBearVisor_Small.pdf |
| HollowStalk.stl |
| M_DomeStand.stl |
| M_Dome_V6+Stand.stl |
| M_Dome_V6.stl |
| M_FanCoverLeft.stl |
| M_FanCoverRight.stl |
| M_KeyholesV7.stl |
| M_LeftBottomRC01.stl |
| M_LH_EarCap.stl |
| M_LH_EarCap_mirr.stl |
| M_RHLongEarcap.stl |
| M_RH_EarCap.stl |
| M_RH_EarCap_Mirr.stl |
| M_RightBottomRC01.stl |
| M_WholeBottom.stl |
| NewRangeFinderBase.stl |
| RF_Base.stl |
| RF_Base_Inner.stl |
| RF_Base_Mirr.stl |
| RF_Base_Outer.stl |
| RF_CapBase_Boba.stl |
| RF_Inner.stl |
| RF_Outer.stl |
| RF_Stalk.stl |
| XL_Dropbear_Visor.pdf |
