James Toy Train Thomas (BRIO / IKEA Compatible) 3D Printer Model
The file 'James Toy Train Thomas (BRIO / IKEA Compatible) 3D Printer Model' is (gcode,stl,3mf) file type, size is 2.5MB.
The file 'James Toy Train Thomas (BRIO / IKEA Compatible) 3D Printer Model' is (gcode,stl,3mf) file type, size is 2.5MB.
James locomotive toy train Thomas (BRIO / IKEA compatible)
You will need the following screws to put everything together.
10x ISO 14585 (DIN7981) 2.9mm x 13mm (https://amzn.to/3WgKty1)
4x ISO 14585 (DIN7981) 2.9mm x 19mm (https://amzn.to/4dcUVgP)
I may earn a commission on qualifying purchases (at no extra cost to you)
Add ring magnets on each side of the train. Use 2x ISO 14585 (DIN7981) 2.9mm x 13mm screws a plastic washer and small neodymium ring magnets diameter 10mm outer / 4mm inner with height of 5mm. (https://amzn.to/3YdC6G4)
The GCODE of "wagon_hopper_0.2mm..." contains a filament color change at 0.92mm (Layer 112) and 22.40mm.
Use a small paint brush with acrylic color and paint on the windows, text, roof etc.
If you enjoy these models and want to support me, check out my other toy trains with wagons, here. Thank you! Have a wonderful day!:
https://cults3d.com/en/design-collections/technerd/lovely-toy-trains
| 10_wheels_0.2mm_PLA_MK3_55m.gcode | 2.5MB | |
| thomas_train_james.stl | 1.0MB | |
| thomas_train_james_0.2mm_PLA_MK3_1h26m.gcode | 3.5MB | |
| thomas_wheel_block_james.stl | 488.2KB | |
| thomas_wheel_block_james_0.2mm_PLA_MK3_55m.gcode | 1.9MB | |
| wagon_hopper.3mf | 58.3KB | |
| wagon_hopper.stl | 973.6KB | |
| wagon_hopper_0.2mm_PLA_MK3_1h27m.gcode | 3.3MB | |
| wheel.stl | 716.0KB | |
| wheels.3mf | 66.8KB |
![Slinky [Toy Story] 3D Printer Model](https://res.3axis.co/ffd959c8-2302-41a1-8513-dd7a610a34b2/images/25cc1f87-4dd0-4aad-85c3-6b7012958ed5_thumb.jpg)
