James Bond HueForge 3D Printer Model
The file 'James Bond HueForge 3D Printer Model' is (stl) file type, size is 33.0MB.
The file 'James Bond HueForge 3D Printer Model' is (stl) file type, size is 33.0MB.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x281mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm
Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA BambuLab Basic Blue Gray Transmission Distance: 3
PLA PolyLite Grey Transmission Distance: 1
PLA PolyLite White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #9 (0.8mm) swap to Blue Gray
At layer #13 (1.12mm) swap to Grey
At layer #21 (1.76mm) swap to White for the rest.
| bond_Front_200x281.stl | 134.7MB |
