JAIPUR Card Game Box 3D Printer Model
The file 'JAIPUR Card Game Box 3D Printer Model' is (stl) file type, size is 37.5MB.
The file 'JAIPUR Card Game Box 3D Printer Model' is (stl) file type, size is 37.5MB.
a custom made Jaipur box, fully 3d printed, you only need to use 2 metal bars 1,6mm x 30mm for the hinges
printing instruction for each piece:
outer lid hinge print 4 times.stl no support, lay down the hole side, print 4 timeshook pivot.stl use support, lay flatinner lid hinge print 4 times.st no support, lay down the hole side, print 4 timeshook pivot cover.stl no support, lay flathook.stl no support, lay flathook bottom hole.stl use support, lay flattokens holder.stl use support, lay flatbottom lid.stl no support, lay vertically, use brim or rafttop lid.stl no support, lay vertically, use brim or raftcards holder.stl use support, lay flatbox bottom.stl use support, lay flatbox top.stl use support, lay flatinner lid bottom.stl no support, lay flatinner lid top.stl no support, lay flatno screws needed, glue the parts toghether (i used 2 component glue), just try to fit the parts before gluing them
| bottom_lid.stl | 7.5MB | |
| box_bottom.stl | 18.2MB | |
| box_top.stl | 18.9MB | |
| cards_holder.stl | 11.9MB | |
| hook.stl | 1.2MB | |
| hook_bottom_hole.stl | 1.3MB | |
| hook_pivot.stl | 784.8KB | |
| hook_pivot_cover.stl | 1.0MB | |
| inner_lid_bottom.stl | 26.8MB | |
| inner_lid_hinge_print_4_times.stl | 1.3MB | |
| inner_lid_top.stl | 26.8MB | |
| outer_lid_hinge_print_4_times.stl | 861.6KB | |
| tokens_holder.stl | 7.4MB | |
| top_lid.stl | 9.1MB |
