Jagdpanther2 1/56 Scale 3D Printer Model
The file 'Jagdpanther2 1/56 Scale 3D Printer Model' is (stl) file type, size is 8.2MB.
The file 'Jagdpanther2 1/56 Scale 3D Printer Model' is (stl) file type, size is 8.2MB.
Hi Folks
here is my latest design for a paper tank from WW2, a Jagdpanther 2 tank destroyer.
This one has loads of detail please see the pictures, so best detail/layer setting would be optimum.
best printed laying flat as you can see in the pics
there are two types of tracks, one with less support required around the wheels, probably best for normal FDM printers and the other would work best on resin printers.
My print was done on an UpPlus2 @.15 layer and was an early test to make sure it would print ok, so some of the details are not all there, will be printing a final full model later.
This took a long time to design but was great fun
I hope you like it and if you make one please post and show
thanks for looking.
Update
to remove supports from tracks, remove the rear supports first then the middle should come out a lot easier.
| Barrel.stl | 55.6KB | |
| JagdP2.stl | 3.8MB | |
| Jp2_Left_track_less_support.stl | 4.7MB | |
| JP2_Lft_track.stl | 4.8MB | |
| Jp2_Right_track_less_support.stl | 4.7MB | |
| Jp2_Rt_track.stl | 4.8MB |
