Just Another Delta Calibration Adjustment Thing.
I wanted a test object that took a little less time to print.
Many thanks to Dolpin for all the great tuning instructions.
Original Thing http://www.thingiverse.com/thing:745523
Outside of the studs = 60mm
Inside of the studs = 45mm
Stud height = 5mm
Arms = 70 x 8mm
Arm thickness = 2mm
Rev 1.2 - add radius on inside of studs to improve accuracy
| Delta_Test_object_-_60mm_v1.2.stl | 136.8KB |
