Jack-O-Lantern Halloween Hueforge 3D Printed Textured Art 3D Printer Model
The file 'Jack-O-Lantern Halloween Hueforge 3D Printed Textured Art 3D Printer Model' is (3mf,stl) file type, size is 37.1MB.
The file 'Jack-O-Lantern Halloween Hueforge 3D Printed Textured Art 3D Printer Model' is (3mf,stl) file type, size is 37.1MB.
Who Doesn't Love Some 3D Printed Halloween Hueforges!
OUR WHOLE COLLECTION IS AVAILABLE FOR PERSONAL AND COMMERCIAL USE THROUGH SUBSCRIPTION TO OUR PATREON.
https://www.patreon.com/DENUSA
We are including Two Versions, the finished and colored 3mf file ( A1 Selected, just change to desired printer).
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 239.99x159.37mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Matte Dark Blue Transmission Distance: 1
PLA BambuLab Basic Orange Transmission Distance: 5
PLA BambuLab Basic Yellow Transmission Distance: 6
PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 5 unique filaments
Swap Instructions:
Start with Black
At layer #10 (0.88mm) swap to Dark Blue
At layer #11 (0.96mm) swap to Orange
At layer #20 (1.68mm) swap to Yellow
At layer #23 (1.92mm) swap to Jade White for the rest.
| jackolanterns_Front_240x159.3mf | 21.1MB | |
| jackolanterns_Front_240x159.stl | 91.8MB |
